Professor W Mark Rainforth
BMet, PhD, FIMMM, CEng, FInstP, CPhys, FRMS, FREng
School of Chemical, Materials and Biological Engineering
Professor of Materials Science and Engineering
POSCO Chair in Iron and Steel Technology
+44 114 222 5469
Full contact details
School of Chemical, Materials and Biological Engineering
Sir Robert Hadfield Building
Mappin Street
91直播
S1 3JD
- Profile
-
I took a first class BMet degree from the Department of Metallurgy in 91直播 in 1984. Following a time with British Steel and TI Research I undertook a PhD in the School of Materials in Leeds in 1990, after which I moved as an academic to the Department of Materials in 91直播. I was promoted to Senior Lecturer in 1995, Reader in 1998, a Personal Chair 2000 and was appointed POSCO Professor of Iron and Steel in 2019. I was President, Royal Microscopical Society, 2006-09 and Head of Department, Department of Materials Science and Engineering, 2011-15.
- Research interests
-
I am an international expert in the design of new resource efficient high strength metal alloys for applications in transport, energy, biomedical engineering and tribology. I focuses on the relationship between composition, processing, microstructure and properties of materials with direct engineering applications. I have published 400 journal papers in high impact journals (including Nature, Science, Science Advances, Acta Materialia, Scripta Materialia etc). I am the winner of the 2024 Bessemer Gold Medal, and winner of the IOM3 Rosenhain and Verulam Medals, past President of the Royal Microscopical Society and gave the 2023 Hatfield Memorial Lecture
Key research interests:
- Designing metal alloys for resource efficiency
- Designing materials for biomedical engineering
- Materials engineering tribological solutions
- Materials characterisation
- Publications
-
Journal articles
- . Journal of Materials Science, 1-22.
- . Wear, 556-557, 205523-205523.
- . Journal of Materials Research and Technology.
- . Journal of Materials Science & Technology, 197, 149-159.
- . ACS Applied Polymer Materials, 6(18), 11586-11603.
- . Wear, 548-549, 205393-205393.
- . Langmuir, 40(25), 13303-13318.
- . Materials Characterization, 208, 113593-113593.
- . Materials Science and Engineering: A, 893, 146140-146140.
- . Journal of Industrial and Engineering Chemistry.
- . Acta Materialia, 256, 119113-119113.
- . Applied Surface Science, 157137-157137.
- . Acta Materialia, 252, 118924-118924.
- . Wear, 518-519, 204649-204649.
- . Scripta Materialia, 227, 115301-115301.
- . Scientific Reports, 13.
- . Acta Materialia, 243, 118538-118538.
- . Wear, 204829-204829.
- . Journal of Microscopy.
- . Journal of Materials Science & Technology, 124, 217-231.
- . Scripta Materialia, 217, 114770.
- . Journal of the Mechanical Behavior of Biomedical Materials, 132, 105267-105267.
- . Biotribology, 30.
- . Journal of Alloys and Compounds, 903.
- . Wear, 490-491, 204184-204184.
- . Acta Biomater.
- . Engineering Failure Analysis, 131, 105909-105909.
- . Metallurgical and Materials Transactions A, 53(2), 597-609.
- . Acta Materialia, 223.
- . Journal of Bio- and Tribo-Corrosion, 7(4).
- . Tribology International, 163, 107147-107147.
- . Wear, 478-479.
- . Materials Characterization, 178.
- . Journal of Physics D: Applied Physics.
- . Tribology International, 107023-107023.
- . Scripta Materialia, 194.
- . Nature, 590(7845), 262-267.
- . Corrosion Science.
- . International Journal of Plasticity, 135.
- . Biotribology, 24.
- . Science Advances, 6(46).
- . Surface and Coatings Technology, 399.
- . Tribology International, 150.
- . Journal of Alloys and Compounds, 835.
- . Acta Materialia, 196, 101-121.
- . Ceramics International, 46(12), 20488-20495.
- . Scripta Materialia, 185, 146-151.
- . Metallurgical and Materials Transactions A.
- . Metallurgical and Materials Transactions A.
- . International Journal of Fatigue, 134.
- . Wear, 444-445.
- . Ceramics International.
- . Nuclear Materials and Energy, 22.
- . Applied Surface Science, 499.
- . Wear.
- . Wear.
- . Acta Materialia, 178, 68-78.
- . Wear, 438-439, 203062-203062.
- . Wear.
- . Tribology Transactions.
- . Wear, 432-433.
- . Journal of Materials Engineering and Performance, 28(7), 4171-4186.
- . Journal of Alloys and Compounds, 801, 208-219.
- . Surface and Coatings Technology, 366, 199-203.
- . Acta Materialia.
- . Acta Materialia, 170, 1-14.
- . Scientific Reports, 9.
- . Journal of Materials Science, 54(8), 6624-6631.
- . Wear, 422-423, 54-67.
- . Scripta Materialia, 162, 77-81.
- . Journal of Alloys and Compounds, 774, 556-564.
- . Metallurgical and Materials Transactions A, 50(1), 271-284.
- . Acta Materialia, 161, 374-387.
- . Journal of Alloys and Compounds, 769, 71-77.
- . Acta Materialia, 152, 301-314.
- . Scientific Reports, 8.
- . Journal of Microscopy, 269(2), 115-116.
- . Journal of Materials Science, 53(9), 6922-6938.
- . Journal of Thermal Spray Technology, 27(8), 1615-1631.
- . Journal of the European Ceramic Society, 38(14), 4585-4589.
- . Acta Materialia.
- . Scripta Materialia, 138, 39-43.
- . Acta Materialia, 135, 14-24.
- . Wear, 376-377, 223-231.
- . Wear, 376-377, 212-222.
- . Wear, 376-377, 1622-1629.
- . Science, 355(6330), 1196-1199.
- . Acta Materialia, 126, 132-144.
- . Materials Characterization, 124, 83-89.
- . Thin Solid Films, 616, 767-772.
- . The International Journal of Advanced Manufacturing Technology, 87(1-4), 519-530.
- . Journal of Materials Science and Technology.
- . Acta Materialia, 119, 43-54.
- . Materials Science and Engineering: A, 674, 286-298.
- . Materials Characterization, 118, 199-205.
- . Applied Physics A: Materials Science and Processing, 122(8).
- . Acta Materialia, 117, 270-285.
- . Journal of Alloys and Compounds, 688, 1141-1150.
- . Journal of the Mechanical Behavior of Biomedical Materials, 59, 404-417.
- . Materials & Design, 103, 259-267.
- . Materials Research Letters, 4(3), 168-173.
- . Materials Science and Technology, 32(16), 1721-1729.
- . Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472(2185).
- . Applied Physics Letters, 108(1).
- Modelling of transient temperature field and phase transformation change: A way for residual stress management in large size forgings. Computer Methods in Materials Science, 16(2), 87-96.
- . Materials Science and Engineering: A, 651, 822-830.
- . Journal of the Mechanical Behavior of Biomedical Materials, 60, 68-77.
- . Acta Materialia, 97, 392-403.
- . Tribology International, 89, 86-96.
- . Journal of Physics D: Applied Physics, 48(30), 305005-305005.
- . Journal of the American Ceramic Society, 98(6), 1848-1857.
- . Acta Materialia, 86, 208-215.
- . Wear, 332-333, 1006-1011.
- . Wear, 330-331, 23-31.
- . Scientific Reports, 5(1).
- . Surface and Coatings Technology, 277, 170-180.
- . Wear, 332-333, 650-661.
- . Journal of Applied Physics, 118(3), 034102-034102.
- . Metallurgical and Materials Transactions A, 45(13), 5997-6007.
- . Advanced Functional Materials, 24(27), 4205-4205.
- . Journal of Materials Processing Technology, 214(7), 1408-1417.
- . Advanced Functional Materials, 24(10), 1408-1408.
- . WEAR, 309(1-2), 126-133.
- . J Mech Behav Biomed Mater, 31, 145-151.
- Microstructure of hot-rolled high-strength steel MAT3830 after intercritical deformation with different cooling rate. Jinshu Rechuli/Heat Treatment of Metals, 38(5), 29-31.
- . Metallurgical and Materials Transactions A, 44(2), 856-872.
- . Advanced Functional Materials.
- . Surface and Interface Analysis.
- . Oxidation of Metals, 1-13.
- . Acta Biomater, 9(4), 6226-6235.
- . Journal of Nanoscience and Nanotechnology, 12(10), 8158-8164.
- . Acta Biomater, 8(6), 2348-2359.
- The effect of intercritical processing parameters on the microstructure development in a microalloyed plate steel. Steel Research International, SPL. ISSUE, 1159-1162.
- Numerical study of the effects of strain path change on the hot deformation behavior of microalloyed austenite model alloy using multiscale approach. Materials Science and Technology Conference and Exhibition 2012, MS and T 2012, 1, 685-692.
- . Faraday Discussions, 156, 41-57.
- Flow softening behavior during dynamic recrystallization in Mg-3Al-1Zn magnesium alloy. Scripta Materialia.
- . Materials Science Forum, 715-716, 703-710.
- . Materials Science Forum, 715-716, 655-660.
- . Acta Materialia, 60(5), 2061-2072.
- . Materials Science Forum, 715-716, 907-912.
- . Materials Science Forum, 715-716, 164-169.
- . Materials Characterization, 64, 107-117.
- . J APPL PHYS, 110(7).
- . OXID MET, 76(3-4), 149-160.
- . METALL MATER TRANS A, 42A(8), 2278-2289.
- . Oxidation of Metals, 76(5-6), 451-468.
- . Scripta Materialia, 65(6), 524-527.
- Characterization of worn alumina hip replacement prostheses. Journal of Biomedical Materials Research - Part B Applied Biomaterials.
- . Engineering Failure Analysis, 18(6), 1576-1583.
- . Wear, 271(9-10), 2150-2156.
- . MATER MANUF PROCESS, 26(1), 127-131.
- . Wear, 270(9-10), 658-665.
- Effect of Deformation Mode on Microstructure Evolution in Nb-Microalloyed Steel. STEEL RESEARCH INTERNATIONAL, 81(9), 70-73.
- . Microscopy and Microanalysis, 16(S2), 602-603.
- . THIN SOLID FILMS, 518(18), 5121-5127.
- . IRONMAK STEELMAK, 37(4), 276-282.
- . ACTA MATER, 58(8), 2912-2925.
- . Ultramicroscopy, 110(9), 1178-1184.
- The effects of process-route variations on the tensile properties of closed-die waspaloy forgings, via statistical modelling techniques. 7th International Symposium on Superalloy 718 and Derivatives 2010, 1, 363-370.
- Through-thickness crystallographic texture of stationary shoulder friction stir welded aluminium. Scripta Materialia.
- . THERMEC 2009, PTS 1-4, 638-642, 3418-3423.
- . THERMEC 2009, PTS 1-4, 638-642, 2694-2699.
- . Materials Today, 12(7-8), 54-54.
- . WEAR, 267(5-8), 965-975.
- . Journal of Physics D: Applied Physics, 42(11), 115410-115410.
- . ACTA MATER, 57(11), 3148-3156.
- . TRIBOL LETT, 34(2), 113-124.
- Effect of interpass time on crystallographic texture during rolling processing of AA6111 aluminum alloy. Cailiao Gongcheng/Journal of Materials Engineering(11), 23-26.
- . MATER HIGH TEMP, 26(2), 169-176.
- . METALL MATER TRANS A, 39A(10), 2486-2494.
- . METALL MATER TRANS A, 39A(10), 2477-2485.
- . SCRIPTA MATER, 59(5), 507-510.
- . COMPOS SCI TECHNOL, 68(3-4), 888-895.
- . MAT SCI ENG A-STRUCT, 475(1-2), 257-267.
- The effect of strain path on strain induced precipitation in a model microalloyed steel. 3rd International Conference on Thermomechanical Processing of Steels, TMP 2008.
- . Ceramic Transactions, 201, 437-444.
- . METALL MATER TRANS A, 38A(10), 2464-2478.
- . WEAR, 263, 707-718.
- . WEAR, 263, 1328-1334.
- . J VAC SCI TECHNOL A, 25(5), 1402-1406.
- . J APPL PHYS, 102(2).
- Investigation of fundamental wear mechanisms at the piston ring and cylinder wall interface in internal combustion engines. P I MECH ENG J-J ENG, 221(J3), 459-459.
- . ACTA MATER, 55(7), 2443-2454.
- . PHILOS MAG, 87(6), 967-978.
- Analysis of the plastic behaviour of an austenitic stainless steel torsionally deformed at high temperature. Metallurgia Italiana, 99(11-12), 25-32.
- . J APPL PHYS, 100(11).
- . MATER SCI TECH-LOND, 22(11), 1369-1379.
- . TRIBOL LETT, 24(2), 171-178.
- . J Microsc, 222(Pt 2), 85-96.
- . J Microsc, 222(Pt 2), 97-104.
- . Micron, 37(5), 412-419.
- . TRIBOL INT, 38(11-12), 1050-1058.
- . MATER CHARACT, 55(4-5), 388-394.
- . THIN SOLID FILMS, 485(1-2), 160-168.
- . WEAR, 259(1-6), 3-3.
- . ACTA MATER, 53(5), 1263-1275.
- . J Microsc, 217(Pt 2), 138-151.
- . Proceedings of the World Tribology Congress III - 2005, 7-8.
- . MAT SCI ENG A-STRUCT, 386(1-2), 420-427.
- The wear behaviour of oxide ceramics - A review. J MATER SCI, 39(22), 6705-6721.
- The wear behaviour of oxide ceramics - A Review. J MATER SCI, 39(22), 6705-6721.
- . Materials Science and Engineering: A, 386(1-2), 420-427.
- . MATER SCI TECH-LOND, 20(10), 1223-1225.
- . SURF COAT TECH, 183(2-3), 275-282.
- . J Microsc, 213(3), 285-295.
- Recent developments in the microscopy of ceramics. ADV IMAG ELECT PHYS, 132, 167-246.
- . J EUR CERAM SOC, 24(7), 2023-2029.
- . MAT SCI ENG A-STRUCT, 351(1-2), 344-357.
- The coarsening of dispersed Al3Ti in aluminum-based matrices. METALL MATER TRANS A, 34(2), 419-421.
- Strain path effects om the austenitic stainless steel AISI 316L at high temperature. Metallurgia Italiana, 95(5), 43-49.
- Microstructural evolution in a model Fe-30wt%Ni alloy during hot plane-strain compression. THERMEC'2003, PTS 1-5, 426-4, 3623-3628.
- High resolution observations of friction-induced oxide and its interaction with the worn surface. TRIBOL INT, 35(11), 731-748.
- Coarsening kinetics at 600 degrees C of Al2O3 dispersoids in a mechanically alloyed aluminium alloy. SCRIPTA MATER, 47(5), 331-335.
- . PHYS REV B, 65(17).
- Precipitation of NbC in a model austenitic steel. ACTA MATER, 50(4), 735-747.
- Evolution and coarsening of Al2O3 dispersoids at 500 degrees C to 600 degrees C in a mechanically alloyed Al-Ti-O based material. METALL MATER TRANS A, 32(12), 2937-2945.
- Formation of primary silicon during cooling and solidification of Al-20%Si alloy. MATER TRANS, 42(10), 2098-2101.
- The role of trace additions of alumina to yttria-tetragonal zirconia polycrystals (Y-TZP). SCRIPTA MATER, 45(6), 653-660.
- TEM studies of the wear of TiAlN/CrN superlattice coatings. SCRIPTA MATER, 45(4), 399-404.
- Effect of treatment variables on size refinement by phosphide inoculants of primary silicon in hypereutectic Al-Si alloys. MATER SCI TECH-LOND, 17(8), 901-905.
- Interfacial reactions between the aluminium alloy matrix and intermetallic reinforcement particles in novel P/M 5056/Ni3AlP composites. Z METALLKD, 92(6), 604-609.
- The structure of FeCo/Ag multilayers. PHILOS MAG A, 81(6), 1533-1546.
- Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials. ACTA MATER, 49(7), 1209-1224.
- The effects of dislocations and grain boundaries on the coarsening of Al4C3 dispersoids at 600 degrees C in two mechanically alloyed Al-Ti-O-C based materials. SCRIPTA MATER, 44(7), 1089-1093.
- The formation of aluminum phosphide in aluminum melt treated with an Al-Fe-P inoculant addition. Z METALLKD, 92(4), 396-398.
- Coarsening kinetics at 600 degrees C of Al4C3 dispersoids in mechanically alloyed Al-Ti-O-C. SCRIPTA MATER, 44(1), 79-86.
- Microstructural development in microalloyed austenite in response to thermomechanical processing. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 1179-1184.
- Effect of phosphorus additions on the spacing between primary silicon particles in a Bridgman solidified hypereutectic Al-Si alloy. J MATER SCI, 36(11), 2667-2672.
- Investigation of the phase constitution and structure of rapidly solidified hard magnetic Nd18Fe76B6 ribbons by transmission electron microscopy. PHILOS MAG A, 81(1), 11-24.
- . Philosophical Magazine A, 81(1), 11-24.
- The effect of microstructure on the morphology of fatigue cracks in UDIMET (R) 720. FATIGUE FRACT ENG M, 23(9), 725-736.
- Effect of long-term room-temperature storage on the structure and properties of glassy melt-spun Mg-Al-Ca alloys. METALL MATER TRANS A, 31(9), 2155-2162.
- 3-D micromagnetic simulation of a Bloch line between C-sections of a 180 degrees domain wall in a {100} iron film. J MAGN MAGN MATER, 218(1), 103-113.
- The effect of thermal treatment, composition and substrate on the texture and magnetic properties of FeCo thin films. J PHYS D APPL PHYS, 33(12), 1450-1459.
- Investigation of the response of a new amorphous ferromagnetic MFM tip coating with an established sample and a prototype device. J MAGN MAGN MATER, 214(3), 225-233.
- Magnetic force microscopy and micromagnetic study of cross-tie wall structures in Co91Nb6Zr3 amorphous thin films. J APPL PHYS, 87(3), 1096-1102.
- . Scripta Materialia, 42(6), 555-560.
- The role of silicon in the formation of the (Al5Cu6Mg2) sigma phase in Al-Cu-Mg alloys. J MATER SCI, 35(6), 1413-1418.
- Austenite phase formation in rapidly solidified Fe-Cr-Mn-C steels. ACTA MATER, 47(18), 4555-4569.
- Preparation and characterisation of a new amorphous tip coating for application in magnetic force microscopy. J MAGN MAGN MATER, 205(2-3), L131-L135.
Fracture of Engineering Materials and Structures, 22(9), 821-829.
. Fatigue - Fatigue damage mechanisms associated with 'tear-drop' cracking in UDIMET 720 (R). FATIGUE FRACT ENG M, 22(9), 821-829.
- Thermal stability of Al/Al11Ce3 and Al/Al11La3/Al3Ni eutectics obtained by Bridgman growth. MATER SCI TECH SER, 15(6), 616-620.
- Transmission electron microscopy study of a 3Y-TZP worn under dry and water-lubricated sliding conditions. J AM CERAM SOC, 82(6), 1483-1491.
- The effect of spray forming on the microstructure and properties of a high chromium white cast iron. J MATER SCI, 34(10), 2291-2301.
- Solidification microstructure formation in the Al-rich Al-La-Ni system. MAT SCI ENG A-STRUCT, 262(1-2), 159-165.
- Solidification microstructure selection in the Al-rich Al-La, Al-Ce and Al-Nd systems. J CRYST GROWTH, 197(1-2), 286-296.
- Characterisation of amorphous MFM tip coatings. Digests of the Intermag Conference.
- Fabrication and mechanical properties of SiC platelet reinforced mullite matrix composites. J EUR CERAM SOC, 19(9), 1777-1787.
- On the role of plastic deformation during the mild wear of alumina. ACTA MATER, 46(18), 6475-6483.
- Some observations on cyclic deformation structures in the high-strength commercial aluminum alloy AA 7150. METALL MATER TRANS A, 29(11), 2727-2736.
- A novel microstructure in the Al-La-Ni ternary eutectic alloy. SCRIPTA MATER, 39(10), 1371-1376.
- The formability of spray-formed, high-chromium content, white cast iron. J MATER SCI LETT, 17(19), 1637-1640.
- The effect of phase constitution on the magnetic structure of nanophase NdFeB alloys observed by magnetic force microscopy. J MAGN MAGN MATER, 188(1-2), 109-118.
- The structure and properties of spray formed cold rolling mill work roll steels. J MATER SCI, 33(13), 3233-3244.
- Magnetic force imaging of domain structures for a (Pr/Nd)FeB alloy. J APPL PHYS, 83(5), 2715-2718.
- Transmission electron microscopy of worn zirconia surfaces. J MATER RES, 13(2), 396-405.
- Magnetic force microscopy of nanocrystalline NdFeB ribbons: A study of tip-sample interaction using a well-characterised sample. J MAGN MAGN MATER, 182(1-2), 111-123.
- Usura per sfregamento di ceramici. Ceramurgia, 28(3), 172-X.
- Dislocation densities, dispersoid identities and the origins of thermal stability and strengthening in three mechanically alloyed aluminium alloys. PHILOS MAG A, 76(5), 1093-1104.
- Characteristics of formation of nanoscale alpha Mg dispersions in glassy melt-spun Mg-Al-Ca alloys. SCRIPTA MATER, 37(3), 311-314.
- Formation and characteristics of coarsening resistant cubic sigma phase in Al-4 center dot 2Cu-1 center dot 6Mg-0 center dot 2Si. MATER SCI TECH SER, 13(8), 655-659.
- Coarsening rates of S' precipitates in Al-4 center dot 1wt% Cu-1 center dot 6wt% Mg alloy during extended treatment at 200 degrees C. PHIL MAG LETT, 76(2), 63-67.
- Intermediate rhombohedral (r-ZrO2) phase formation at the surface of sintered Y-TZP's. J MATER SCI LETT, 16(11), 883-885.
- The pseudo-ordered structure in light emitting porous and nanocrystalline silicon films. APPL PHYS LETT, 70(17), 2265-2267.
- Coarsening of S'-Al2CuMg in Al-Cu-Mg base alloys. J MATER SCI LETT, 16(6), 420-421.
- The effect of powder processing route on the hydrothermal degradation of Y-TZP. Key Engineering Materials, 132-136, 631-634.
- Turning the heat on alloys. Materials World, 5(8), 459-460.
- Microstructural changes induced by dry sliding wear of a A357/SiC metal matrix composite. MATER SCI TECH SER, 13(1), 41-48.
- Dense zirconia-SiC platelet composites made by pressureless sintering and hot pressing. J EUR CERAM SOC, 17(7), 913-920.
- Mullite evolution in ceramics derived from kaolinite, kaolinite with added alpha-alumina, and sol-gel precursors. BRIT CERAM T, 96(5), 181-187.
- . Materials Science and Technology, 12(12), 1007-1014.
- Fatigue of a nickel base superalloy with bimodal grain size. MATER SCI TECH SER, 12(12), 1007-1014.
- TEM observations of fatigue damage accumulation at the surface of the near-alpha titanium alloy IMI 834. ACTA MATER, 44(9), 3453-3463.
- Nano-beam analysis of Omega precipitates in a Al-Cu-Mg-Ag alloy. SCRIPTA MATER, 35(2), 261-265.
- The coarsening of theta precipitates in an Al-4WT% Cu alloy as a result of frictional heating. SCRIPTA MATER, 34(6), 877-881.
- Formation of interface phases in the titanium alloy IMI 834. J MATER SCI, 31(5), 1205-1211.
- The sliding wear of ceramics. CERAM INT, 22(5), 365-372.
- MICROSTRUCTURE STUDY OF HIGH COERCIVITY GA CONTAINING ND-FE-B PERMANENT-MAGNETS. J MAGN MAGN MATER, 145(1-2), L19-L22.
- PHASE CONSTITUTION IN MELT-SPUN AL-10 WT-PERCENT-Y. PHILOS MAG B, 70(5), 1129-1137.
- Are high resolution microscopes too expensive?. Materials World, 2(10), 527-530.
- STRUCTURE, PROPERTIES AND RESPONSE TO HEAT-TREATMENT OF MELT-SPUN AL-Y AND AL-LA ALLOYS. J MATER SCI, 29(15), 3913-3918.
- COARSENING OF PRECIPITATES AND DISPERSOIDS IN ALUMINUM-ALLOY MATRICES - A CONSOLIDATION OF THE AVAILABLE EXPERIMENTAL-DATA. J MATER SCI, 29(7), 1895-1900.
- WEAR BEHAVIOR OF RAPIDLY SOLIDIFIED FE68CR18MO2B12 ALLOYS. WEAR, 172(2), 135-145.
- PRESSURELESS SINTERING OF ZIRCONIA-SIC PLATELET COMPOSITES. BRIT CERAM T, 93(3), 119-125.
- MICROSTRUCTURE ANALYSIS OF NANOCRYSTALLINE FE-ND-B RIBBONS WITH ENHANCED HARD MAGNETIC-PROPERTIES. J MAGN MAGN MATER, 128(3), 307-312.
- . Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 207(3), 155-162.
- DEFORMATION STRUCTURES INDUCED BY SLIDING CONTACT. PHILOS MAG A, 66(4), 621-641.
- . Journal of the European Ceramic Society, 10(1), 21-31.
- CONTAMINATION RATES FROM CE-TZP AND Y-TZP BALL MILLING MEDIA. BRIT CERAM TRANS J, 90(1), 18-21.
- . Journal of Materials Science, 25(4), 2233-2244.
- Grain size dependence of the mechanical properties in TZP ceramics. British ceramic. Transactions and journal, 88(1), 1-6.
- . steel research international.
- . Key Engineering Materials, 786, 44-51.
- . Physical Review B, 91(13).
- . ChemInform, 28(30), no-no.
- . Surface and Coatings Technology.
Chapters
- , Magnesium Technology 2024 (pp. 151-153). Springer Nature Switzerland
- , Processing of Ceramic and Metal Matrix Composites (pp. 134-140). Elsevier
- , Processing of Ceramic and Metal Matrix Composites (pp. 40-45). Elsevier
- , 窜颈谤肠辞苍颈补鈥88 (pp. 337-366). Springer Netherlands
- , Superalloy 718 and Derivatives (pp. 362-370). John Wiley & Sons, Inc.
- , EMC 2008 14th European Microscopy Congress 1鈥5 September 2008, Aachen, Germany (pp. 587-588). Springer Berlin Heidelberg
- , Interface Controlled Materials (pp. 100-105). Wiley-VCH Verlag GmbH & Co. KGaA
- , del_Journal of Metastable and Nanocrystalline Materials: Winter e-volume 2005 Trans Tech Publications Ltd.
Conference proceedings papers
- . IOP Conference Series: Materials Science and Engineering, Vol. 375 (pp 012019-012019)
- Comparison of squats and studs from different traffic environments. Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018 (pp 218-227)
- . International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 28(1) (pp 31-46)
- . Journal of Physics: Conference Series, Vol. 903 (pp 012041-012041)
- . Magnesium Technology 2017 (pp 225-233), 26 February 2017 - 2 March 2017.
- . Journal of Physics: Conference Series, Vol. 644 (pp 012011-012011)
- . Journal of Physics: Conference Series, Vol. 644 (pp 012029-012029)
- . RECRYSTALLIZATION AND GRAIN GROWTH IV, Vol. 715-716 (pp 171-+)
- . TRIBOLOGY INTERNATIONAL, Vol. 43(10) (pp 1872-1881)
- . SURFACE AND INTERFACE ANALYSIS, Vol. 42(4) (pp 185-188)
- . SURFACE AND INTERFACE ANALYSIS, Vol. 42(4) (pp 175-179)
- . SURFACE AND INTERFACE ANALYSIS, Vol. 42(4) (pp 180-184)
- . ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2009 (EMAG 2009), Vol. 241
- . ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2009 (EMAG 2009), Vol. 241
- . Journal of Physics: Conference Series, Vol. 241
- . THERMEC 2009, PTS 1-4, Vol. 638-642 (pp 2622-2627)
- . WEAR, Vol. 267(11) (pp 2122-2131)
- Deformation mechanisms in magnesium alloy elektron 675. TMS Annual Meeting (pp 497-502)
- . WEAR, Vol. 267(5-8) (pp 1191-1197)
- . WEAR, Vol. 267(1-4) (pp 441-448)
- Examination of Biolox (R) delta from Serum Lubricated Reciprocating Sliding Wear. ADVANCED TRIBOLOGY (pp 869-870)
- Hydrothermal degradation of zirconia bioceramics: Effect of ternary oxide additions. BIOCERAMICS 21, Vol. 396-398 (pp 145-148)
- . TRIBOLOGY INTERNATIONAL, Vol. 42(1) (pp 99-110)
- Deformation Mechanisms in Magnesium Alloy Elektron 675. MAGNESIUM TECHNOLOGY 2009 (pp 497-502)
- . JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 201(1-3) (pp 662-668)
- . MEASUREMENT SCIENCE & TECHNOLOGY, Vol. 19(3)
- EELS Characterisation and Valence Determination of Mn Minerals from the Kalahari Manganese Field in South Africa. - art. no. 012045. EMAG: ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2007, Vol. 126 (pp 12045-12045)
- Oxidation performance of nano-scale multilayer coatings on gamma-TiAl - art. no. 012022. EMAG: ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2007, Vol. 126 (pp 12022-12022)
- 3D Surface Reconstruction and FIB Microscopy of Worn Alumina Hip Prostheses - art. no. 012044. EMAG: ELECTRON MICROSCOPY AND ANALYSIS GROUP CONFERENCE 2007, Vol. 126 (pp 12044-12044)
- Oxidation characteristics of gamma-TiAl-8Nb coated with a CrAlYN/CrN nanoscale multilayer coating. STRUCTURAL ALUMINIDES FOR ELEVATED TEMPERATURES: GAMMA TITANIUM AND OTHER: METALLIC ALUMINIDES (pp 315-322)
- Subsurface deformation of worn Al-Cu and Al-Mg alloys. ADVANCES IN FRACTURE AND MATERIALS BEHAVIOR, PTS 1 AND 2, Vol. 33-37 (pp 483-488)
- Flow stress modelling of magnesium AZ31 alloy based on high strain plane strain compression data. MAGNESIUM TECHNOLOGY 2008 (pp 75-80)
- Investigating macrozones in titanium billet using electron backscattered diffraction. TMS 2008 ANNUAL MEETING SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES (pp 391-396)
- . WEAR, Vol. 263 (pp 756-765)
- . WEAR, Vol. 263 (pp 808-820)
- An analysis of deformation microstructure and subsequent recrystallisation in hot deformed aluminium alloy AA5052 using forward and reverse torsion. Fundamentals of Deformation and Annealing, Vol. 550 (pp 223-228)
- Observations of strain induced precipitation during the thermomechanical processing of AA6111 alloy. Fundamentals of Deformation and Annealing, Vol. 550 (pp 211-216)
- . PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, Vol. 221(J3) (pp 333-343)
- . TRIBOLOGY INTERNATIONAL, Vol. 40(2) (pp 160-169)
- An analysis of strain path effects on static recrystallisation in hot worked aluminium alloy AA5052 using forward and reverse torsion. Recrystallization and Grain Growth III, Pts 1 and 2, Vol. 558-559 (pp 407-412)
- An Analysis of Microstructure in TIMETAL庐 6-2-4-6 Billet Taking Process History into Account. Ti-2007 - Proceedings of the 11th World Conference on Titanium, Vol. 2 (pp 873-876)
- . JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 177(1-3) (pp 36-40)
- An analysis of microband orientation in hot deformed aluminium alloy AA5052 using forward and reverse torsion. ALUMINIUM ALLOYS 2006, PTS 1 AND 2, Vol. 519-521 (pp 877-882)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 331-334)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 343-346)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 89-94)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 327-330)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 95-98)
- . EMAG-NANO 2005: Imaging, Analysis and Fabrication on the Nanoscale, Vol. 26 (pp 65-68)
- . WEAR, Vol. 259(1-6) (pp 553-561)
- . WEAR, Vol. 259(1-6) (pp 577-589)
- . WEAR, Vol. 259(1-6) (pp 490-500)
- Strain induced precipitation in model and conventional microalloyed steels during thermomechanical processing. MICROALLOYING FOR NEW STEEL PROCESSES AND APPLICATIONS, Vol. 500-501 (pp 139-145)
- Texture evaluation of titanium aerospace alloy ti 834 using hot axisymmetric compression tests. ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, Vol. 495-497 (pp 693-698)
- Electron microscopy analysis on the worn surface of a high-chromium white iron during dry sliding contact. Surface Engineering 2004 - Fundamentals and Applications, Vol. 843 (pp 299-304)
- Effect of strain reversal on the dynamic spheroidization of Ti-M-4V during hot deformation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 35A(9) (pp 2993-3001)
- Fine structure of shear bands formed during hot deformation of two austenitic steels. MATERIALS TRANSACTIONS, Vol. 45(7) (pp 2157-2164)
- . Surface and Coatings Technology, Vol. 177-178 (pp 252-259)
- . SURFACE & COATINGS TECHNOLOGY, Vol. 177 (pp 198-203)
- Characteristics of the deformed and recrystallised grains obtained after hot plane strain compression of a model Fe-30wt%Ni alloy. RECRYSTALLIZATION AND GRAIN GROWTH, PTS 1 AND 2, Vol. 467-470 (pp 21-26)
- Understanding interfacial bonding in alumina doped yttria-stabilised tetragonal zirconia using electron energy loss spectroscopy. ELECTRON MICROSCOPY AND ANALYSIS 2003(179) (pp 433-436)
- EBSD study of the hot deformation microstructure characteristics of a type 316L austenitic stainless steel. ELECTRON MICROSCOPY AND ANALYSIS 2003(179) (pp 237-240)
- Oxidation of nanoscale TiAIN/VN multilayer coatings. ELECTRON MICROSCOPY AND ANALYSIS 2003(179) (pp 413-416)
- . WEAR, Vol. 255 (pp 517-526)
- . WEAR, Vol. 255 (pp 956-966)
- . SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, Vol. 58(4) (pp 689-698)
- Investigating precipitation in microalloyed austenite during thermomechanical processing. THERMEC'2003, PTS 1-5, Vol. 426-4 (pp 1255-1260)
- Microstructural changes induced by wear. BOUNDARY AND MIXED LUBRICATION: SCIENCE AND APPLICATIONS, Vol. 40 (pp 273-282)
- Sliding wear behaviour of novel AA2124 aluminium alloy/Ni3Al composites. ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, Vol. 396-4 (pp 1473-1478)
- Processing and structural characterisation of 3Y-TZP ceramics resistant to hydrothermal ageing. EURO CERAMICS VII, PT 1-3, Vol. 206-2 (pp 1053-1056)
- Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy-Ni3Al powder metallurgy composite. WEAR, Vol. 250 (pp 1421-1432)
- The wear behaviour of high-chromium white cast irons as a function of silicon and Mischmetal content. WEAR, Vol. 250 (pp 449-461)
- The application of laser scanning confocal microscopy to tribological research. WEAR, Vol. 250 (pp 1159-1168)
- Wear mechanisms of monolithic and multicomponent nitride coatings grown by combined arc etching and unbalanced magnetron sputtering. SURFACE & COATINGS TECHNOLOGY, Vol. 146 (pp 430-435)
- Microstructure and magnetoelastic properties of FeCo/Ag multilayers. JOURNAL OF APPLIED PHYSICS, Vol. 89(11) (pp 7511-7513)
- Effect of allay composition and reinforcement with silicon carbide on the microstructure and mechanical properties of three silicide dispersion strengthened aluminium alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 304 (pp 524-528)
- Differentiation of zirconia polymorphs using EELS and ELNES. ELECTRON MICROSCOPY AND ANALYSIS 2001(168) (pp 303-306)
- Grain boundary segregation in Al2O3 doped 3Y-TZP ceramics. ELECTRON MICROSCOPY AND ANALYSIS 2001(168) (pp 299-302)
- Study of the static recrystallisation of an Fe-%30Ni alloy and comparison with plain carbon steels. RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2 (pp 831-836)
- Opportunities and pitfalls in characterisation of nanoscale features. MATERIALS SCIENCE AND TECHNOLOGY, Vol. 16(11-12) (pp 1349-1355)
- Microstructural evolution at the worn surface: a comparison of metals and ceramics. WEAR, Vol. 245(1-2) (pp 162-177)
- Precipitation Behaviour of Nb(CN) in a Model Austenite During Thermomechanical Processing. Thermomechanical Processing of Steels (pp 177-185). London, 24 May 2000 - 26 May 2000.
- Characterisation of FeBSiC coated MFM tips using Lorentz electron tomography and MFM. IEEE TRANSACTIONS ON MAGNETICS, Vol. 35(5) (pp 3986-3988)
- Tribological investigation of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc unbalanced magnetron deposition. VACUUM, Vol. 53(1-2) (pp 123-126)
- TEM observations of wear mechanisms of TiAlCrN and TiAlN/CrN coatings grown by combined steered-arc/unbalanced magnetron deposition. WEAR, Vol. 229 (pp 74-82)
- The rolling/sliding wear response of conventionally processed and spray formed high chromium content cast iron at ambient and elevated temperature. WEAR, Vol. 229 (pp 587-599)
- Magnetic force microscopy of recording heads. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 331-334)
- Determination of the distribution of NbC precipitates in novel microalloyed steels. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 467-470)
- On the crystal structure of AlaCuMg, S ', in Al-Cu-Mg alloys. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 279-282)
- Magnetic force microscopy of soft magnetic films. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 307-310)
- The structure of FeCo/Ag multilayers. ELECTRON MICROSCOPY AND ANALYSIS 1999(161) (pp 271-274)
- MFM of nanocrystalline NdFeB: a study of the effect of processing route on the micromagnetic structure. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 190(1-2) (pp 48-59)
- Micromagnetic and MFM studies of a domain wall in thick {110} FeSi. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 190(1-2) (pp 17-27)
- The origin and interpretation of fine scale magnetic contrast in magnetic force microscopy: A study using single-crystal NdFeB and a range of magnetic force microscopy tips. JOURNAL OF APPLIED PHYSICS, Vol. 83(11) (pp 6411-6413)
- 3-D simulation of Bloch lines in 180 degrees domain walls in thin iron films. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 177 (pp 229-230)
- Micromagnetics of a square iron platelet containing the junction of four 90 degrees domain walls. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 177 (pp 227-228)
- Modelling of MFM images of 180 degrees and 90 degrees domain walls in iron films. IEEE TRANSACTIONS ON MAGNETICS, Vol. 33(5) (pp 4056-4058)
- Simulation of 3-D micromagnetic structures in thin iron platelet. IEEE TRANSACTIONS ON MAGNETICS, Vol. 33(5) (pp 4170-4172)
- Effect of silicon additions on structure and stability of Al-7.5wt%Mn alloy melt-spun ribbons. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 226 (pp 157-160)
- Three-dimensional simulation of the disturbance of magnetic domain walls by magnetic force microscope tips. JOURNAL OF APPLIED PHYSICS, Vol. 81(8) (pp 4686-4688)
- The effect of processing route, composition and hardness on the wear response of chromium bearing steels in a rolling-sliding configuration. WEAR, Vol. 203 (pp 220-229)
- Work hardening behaviour at the worn surface of Al-Cu and Al-Si alloys. WEAR, Vol. 203 (pp 171-179)
- . 1997 IEEE International Magnetics Conference (INTERMAG'97), 1 April 1997 - 4 April 1997.
- Observations of high strain deformation at the surface of a worn zirconia. ELECTRON MICROSCOPY AND ANALYSIS 1997(153) (pp 499-502)
- Dislocation generation during the sliding wear of ceramics. ELECTRON MICROSCOPY AND ANALYSIS 1997(153) (pp 503-506)
- The effect of tip type and scan height on magnetic domain images obtained by MFM. IEEE TRANSACTIONS ON MAGNETICS, Vol. 32(5) (pp 4138-4140)
- . The Mechanics of Thin Film Coatings
- Enhanced roll materials for forged steel work rolls. 37TH MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, Vol. 33 (pp 213-219)
- Microstructure and mechanical properties of three dispersion strengthened aluminium base alloys after extended holding at elevated temperatures. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 925-930)
- A COMPARISON OF DOMAIN IMAGES OBTAINED FOR NANOPHASE ALLOYS BY MAGNETIC FORCE MICROSCOPY AND HIGH-RESOLUTION LORENTZ ELECTRON-MICROSCOPY. IEEE TRANSACTIONS ON MAGNETICS, Vol. 31(6) (pp 3349-3351)
- THE EFFECT OF ALUMINA FIBER REINFORCEMENT ON THE WEAR OF AN AL-4.3-PERCENT-CU ALLOY. WEAR, Vol. 181 (pp 312-324)
- A comparative study of the long term stability to coarsening at 200 degrees C of selected high strength wrought aluminium alloys. LIGHT WEIGHT ALLOYS FOR AEROSPACE APPLICATIONS (pp 129-141)
- A TRANSMISSION ELECTRON-MICROSCOPY STUDY OF WEAR OF MAGNESIA PARTIALLY-STABILIZED ZIRCONIA. WEAR, Vol. 162 (pp 322-331)
- NANOSTRUCTURE INVESTIGATION OF RAPIDLY SOLIDIFIED NDFEB HARD MAGNETIC-ALLOYS. ELECTRON MICROSCOPY AND ANALYSIS 1993(138) (pp 457-460)
- INTERFACIAL REACTIONS DURING THIXOFORMING OF ALUMINUM - SIC METAL MATRIX COMPOSITES. INTERFACIAL PHENOMENA IN COMPOSITE MATERIALS 91 (pp 227-230)
- . Materials Science Forum, Vol. 654-656 (pp 1634-1637)
- (pp 711-712)
- . 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275)
- . 1997 IEEE International Magnetics Conference (INTERMAG'97)
Preprints
- Research group
-
PDRA:
Dr Michal Krzyzanowski
Dr Joanna Sharp
Dr Amit Rana
Dr Peng Zeng
Dr Le Ma
Dr Akemi Nogiwa Valdez
PhD:
Paul Nnamchi (Joint with Prof Todd)
E Lizz Cedillo Saucedo* (Joint with Prof Reaney)
Leili Shirkhan*
Jake Corteen (Joint with Prof Todd)
Daryoush Ahmadi*
Alfonce Chamisa* (Joint with Dr Palmiere)
Feng Qian*
Lampros Kurtis (Joint with Prof Todd)
Erfan Abasi*
Mark Todd*
Junheng Goa* (Joint with Prof Todd)
Dikai Guan* (Joint with Prof Todd)
Samira Bostanchi*
Weigang Yang* (Joint with Dr Morley)
Zahra Fard
Peng Gong* (Joint with Dr Palmiere)
Xin Pan*
Itzel Muller*
Haiyun Wang* (Joint with Prof Todd)
*= Principal Supervisor
- Teaching activities
-
MAT2320: Microstructure Design and Control-Metals
MAT373: Surface Degradation and Protection
MAT3334/6334: Manufacturing Aspects of Coatings
- Professional activities and memberships
-
- Fellow Royal Academy of Engineering (FREng)
- Fellow Institute of Materials, Minerals and Mining (FIMMM)
- Fellow Institute of Physics (FInstP)
- Fellow Royal Microscopical Society (FRMS)
- Chartered Engineer (CEng)
- Chartered Physicist (CPhys)
Links